Premset

World’s first

switchgear

with shielded solid insulation (2SIS)

  • Safe and reliable operation of 10 kV network in any conditions
  • Premset is always smaller than single-end service assembled chamber
    (375 mm wide)
  • Easy installation and upgrades
  • Reduction of operating
    costs and increased service life
  • Readiness for «smart» networks
  • Minimum maintenance

(Produced by ELERON under the partnership agreement with Schneider Electric)

Premset

01

Small size

width of 375 mm

02

Safety

High degree of protection of primary circuits IP67

03

Flexibility

possibility of installing microprocessor
protection of any manufacturer

04

Reliability

service life increased by 30% and high
mechanical and switching life - 10 000 IO cycles / 50 short-circuit current disconnections

05

Modular design

Fully compatible cells
allows assembling a substation of any configuration. Simple modification of the cells

06

Simplicity

One unit with three positions "On - Off - Grounded". Same controls and same dimensions for all cell types

07

Trust of customers

More than 4,500,000 units of switchgear
devices installed worldwide

Premset will be the best choice

Whether you want to order a ready-made unit with delivery in the shortest possible time, or you need a solution specifically designed to meet your requirements.

Safety

The safest medium voltage switchgear in its class

Insulation

Epoxy resin or EPDM coated
with electrical shield

  • Free from environmental influences and providing protection against aggressive effects of moisture, dust, and other substances under severe operating conditions
  • No risk of internal arcing thanks to 2SIS technology
  • Insulated parts can be touched («PA» class)
  • The built-in device allows cable testing from the front panel of the cell without dismantling cable inputs and operations in the cable compartment
  • Zero safety perimeter due to connection of shielded solid insulation to ground circuit.
  • Insulation is not affected by environment and top layer condition due to IP67 and zero electric field potential
  • Complete insulation of main circuits with zero potential at each point*
  • Cable compartment, switchgear, and busbar compartment tested for 21 kA arc containment for 1 second
  • Internal arc resistance class: AFL-R - 4-side protection
  • Sharp reduction in the risk of inter-phase short-circuits
  • Reduced risk of incorrect actions by Premset maintenance personnel thanks to intuitive and easy operation
  • Simple and safe operations thanks to the built-in, keyless interlock between main and grounding unit
  • 3-in-1 safety for tripping, disconnecting and grounding Only two operations - one for tripping and disconnecting, the other - for grounding.
  • Solid shielded insulation at any point on the housing and live parts has zero potential
  • The device meets the requirements of IEC 62271-200

Efficiency

Maximum efficiency

The series consists of components that can be used in any configuration, which makes it easy to offer a solution according to customer requirements. Small size and unification of the cell dimensions, as well as the front cable connection significantly reduce the time and cost of cell installation.

Ready-made smart solutions for power supply

Premset architecture allows improving your power system with new cell functions:

  • Feeder line automation: integrated communication and intelligent controls
  • Load control: built-in intelligent instrumentation
  • Asset management: advanced switchgear and transformer monitoring tools
  • Automatic transfer switch (ATS) system with integrated power source switching solution reduces power interruptions

Easy and fast installations, upgrades and maintenance. Small size and unification of the cell dimensions, as well as the front cable connection significantly reduce the time and cost of cell installation. Each element of the system is designed to facilitate installation and commissioning:

  • Unified busbar and cable connection system for all cell types Patented power connection system features versatility and simplicity
  • Convenient connection of cables at a height of 700 mm from the floor
  • No need for preventive maintenance and service

Intelligent electronic devices

The electronic relay protection devices used in Premset units enable integration into communication systems via standard protocols and simple plug-and-play configuration. This allows creating a flexible system with integrated web technologies, pre-configured and tested, which can be easily upgraded as needed. With Premset, you can easily create an intelligent medium-voltage power distribution system

Reliability

  • Switchgear drive The mechanical life of the VDC drive is 10,000 operations
  • Arc-extinguishing and insulating medium of devices
  • VDK switching life - 50 disconnections of 25 kA current
  • Electrical shield slows down the ageing process of the insulation due to the absence of tracking processes. Service life of up to 40 years
  • No compressed gases in switchgear
  • Insulation of live parts

Reliability and durability

  • Guaranteed long service life
  • Minimal maintenance
  • Connections of live parts are maintenance-free due to the tightness of the connection and the damping properties of the dielectric material

Service life:

more than 30 years

Long service life due to shielded solid insulation

01

SF6 gas-free design extends service life of the unit and facilitates disposal at the end of the service life

02

2SIS system is applicable to all types of cells, such as load disconnectors or circuit breakers with disconnector function, new small-size metering cells, or current and voltage transformers

Shielded solid insulation extends service life of equipment, thereby reducing maintenance costs. In addition, complete isolation of the primary circuit from the environment enables to:
reduce the risk of internal arcing;
significantly reduce maintenance;
increase the safety of life and property.

Shielded Solid Insulation is used for:

  • Switchgear
  • Measuring cell
  • Measuring transformers

Small size

Small size and modular design

01

Small size and modular design
of all types of cells

02

Unmatched simplicity of a modular system based on fully compatible functional units

03

Fully compatible cells allow assembling a substation of any configuration

1 х CB AIS = 2 x CB 2SIS

Reduction of
area by up to 50%

The most space-saving switch in the range 17,5 - 25 kA

Comparison with competitors

Premset (SE)

Competitors

Rated current

up to 1250 А

up to 630 А

Insulation of live parts

Solid shielded

SF6 gas or non-shielded

Protection class

IP67

65 and lower

Cable insulation testing

Special device without operations in the cable compartment

In the cable compartment

Premset – target segments (RF)

Premset can be applied in most market segments

DPCs - 4%

Food industry - 15%

Water supply and wastewater disposal - 23%

Mining and metallurgy - 11%

Other industries - 10%

Oil and gas - 1%

Electric distribution companies - 8%

Infrastructure - 15%

Commercial buildings - 13%

Premset in mining

(StandartTsement plant, Belgorod, RF)

Customer’s tasks

• No ability to maintain the substation

• Need for high-quality and reliable equipment

• Protection against human errors of the personnel

Why Premset?

• Superior performance of equipment; safety and reliability

• Interlocks for preventing erroneous actions of personnel

• Minimal maintenance

• Small size of Premset

Description and specifications

Premset is the first switchgear with solid shielded insulation. The system includes functional units such as:

Load disconnectors with disconnector function or circuit breakers with disconnector function

Built-in instrumentation

Current and voltage transformers

"Custom-made" version according to your requirements. The Premset series offers a wide range of equipment for all applications: easy-to-operate switches, circuit breakers, measurement devices for all types of substations with different connection options.

"All-in-one" solution. Schneider Electric's patented, unique interface to connect all elements: one set for every cable connection: front, back, bottom, top. Built-in current and voltage transformers allow optimizing protection and control functions: no need for an additional compartment. Schneider Electric's patented multi-purpose power connection system provides continuous screen grounding. A large selection of cable compartments in different sizes for any substation application with different cable input options.

Electric characteristics

Voltage

Rated voltage

fr

(Hz)

50/60

Rated frequency

Urat

(kV, rms)

6-10-15

Insulation class

Test voltage of industrial frequency

Standard value (1)

50/60 Hz, 1 min (kV, rms.)

42

Between contact elements (2)

50/60 Hz, 1 min (kV, rms)

48

Pulse test voltage

Standard value (1)

Up

1.2/50 ms (kV, inst.)

42

Between contact elements (2)

Up

1.2/50 мс (kV, inst.)

110

Current

Busbar current

Irat

(A, rms)

630-125

Thermal resistance current

1 s
3 s
4 s

1 s
3 s
4 s

(1) Test voltage relative to ground and between phases.

(2) Test voltage between device contacts with two breaks per pole in disconnected state.

(3) According to the current range of conformity verification requirements.

Dimensions

Unified dimensions for the whole cell series

Width: 375 mm for all cells with rated current of 630 А and for cells with solid shielded insulation

Width: 750 mm for all cells with rated current of 1250А and for measuring air-insulated cells with full compatibility with other cells

Depth: 910 mm (1135 mm with gas duct)

Height: from 1550 to 2150 mm, depending on the size of low-voltage compartment (minimum height of the cell with a small low-voltage compartment is 1350 mm)

Height of cable input point: 700 mm in standard version (500 mm – when small cable compartment is used)

GOST standards:

GOST 12.2.007.4-75: Occupational safety standards system. Cabinets of complete switchgears and complete transformer substations, single-end service assembled chambers, cells of sealed gas-insulated switchgears

GOST 1516.3-96: Alternating current electrical equipment for voltage from 1 to 750 kV.

Electrical insulation strength requirements

Protection class

All outer surfaces of the cell: IP3X

Between compartments: IP2X

Main circuits and all high-voltage parts: IP67 (except for measuring cells M06A, M12A)

Flooding

Operation of all cell types within 3 days of flooding (except air-insulated measuring cell M06A)

After flooding, accessories, auxiliary equipment, and relays may require maintenance or replacement

Class of protection against mechanical impacts

IK07 for standard version

Vibration resistance

IEC 60721, 3M4 for standard version

IACS-E10 for special marine version

Environmental characteristics

Altitude:

Up to 3000 m - without taking special measures, except for shielded cable connections.

More than 3000 m - standard precautions: shielded cable connections and a 10% reduction in dielectric properties every 1000 m

Temperature (indoor installation version)

Storage: from – 40 to + 80°C

Operation: from – 25 to + 40°C (normal conditions), IEC 60721 – 3K6 class

Operation: from – 40 to + 65°C (please contact Schneider Electric to get more information)

Condensation / humidity:

IEC 60721, 3K6 and 3Z7 classes

Chemical impact / pollution :

IEC 60721, 3C2 class

Dust :

IEC 60721, 3S2 class

Flammability and fire resistance:

Tests at 850°C according to IEC 60695-2-10 /-11 /-12

Коммуникационные аппараты

Инновационная технология изготовления коммутационных аппаратов Однолинейная схема Premset включает в себя:
b вакуумный выключатель с функцией разъединителя или выключатель нагрузки с функцией разъединителя;
b заземляющий разъединитель в герметичном корпусе, заполненном воздухом под атмосферным давлением: v высоковольтные кабели могут быть заземлены непосредственно через заземляющий разъединитель без использования дополнительных элементов; v последовательное подключение двух аппаратов обеспечивает двойной изолирующий разрыв; v коммутационный аппарат не содержит элегаз SF6 и соответствует требованиям RoHS по утилизации и защите окружающей среды. Коммутационный аппарат «3 в 1»
Инновационная технология изготовления коммутационных аппаратов Однолинейная схема Premset включает в себя:
b вакуумный выключатель с функцией разъединителя или выключатель нагрузки с функцией разъединителя;
b заземляющий разъединитель в герметичном корпусе, заполненном воздухом под атмосферным давлением: v высоковольтные кабели могут быть заземлены непосредственно через заземляющий разъединитель без использования дополнительных элементов; v последовательное подключение двух аппаратов обеспечивает двойной изолирующий разрыв; v коммутационный аппарат не содержит элегаз SF6 и соответствует требованиям RoHS по утилизации и защите окружающей среды. Коммутационный аппарат «3 в 1»

Электрические характеристики

Напряжение Номинальное напряжение Uном (кВ, действ.) 6-10-15 Номинальная частота fr (Гц) 50/60 Уровень изоляции Испытательное напряжение промышленной частоты Стандартное значение (1) 50/60 Гц, 1 мин (кВ, действ.) 42 Между контактами (2) 50/60 Гц, 1 мин (кВ, действ.) 48 Импульсное испытательное напряжение Стандартное значение (1) Up 1.2/50 мс (кВ, мгн.) 95 Между контактами (2) Up 1.2/50 мс (кВ, мгн.) 110 Ток Ток сборных шин Iном (A, действ.) 630-1250 Ток термической стойкости 1 с 3 с 4 с 25 кА 25 кА 20 кА (1) Испытательное напряжение относительно земли и между фазами. (2) Испытательное напряжение между контактами аппарата с двумя разрывами на полюс в отключенном состоянии. (3) В соответствии с действующей номенклатурой требований по подтверждению соответствия. Размеры Единые размеры для всей серии ячеек p Ширина: 375 мм для всех ячеек с номинальным током 630 А и для ячеек с экранированной твердой изоляцией p Ширина: 750 мм для всех ячеек с номинальным током 1250А и для измерительных ячеек с воздушной изоляцией при полной совместимости с остальными ячейками p Глубина: 910 мм (1135 мм с газоотводным каналом) p Высота: от 1550 до 2150 мм, в зависимости от габарита низковольтного отсека (минимальная высота ячейки с малым низковольтным отсеком составляет 1350 мм) p Высота точки подключения кабелей: 700 мм в стандартном варианте (500 мм при использовании малого кабельного отсека) Стандарты ГОСТ p ГОСТ 12.2.007.4-75: Система стандартов безопасности труда. Шкафы комплектных распределительных устройств и комплектных трансформаторных подстанций, камеры сборные одностороннего обслуживания, ячейки герметизированных элегазовых распределительных устройств p ГОСТ 1516.3-96: Электрооборудование переменного тока на напряжения от 1 до 750 кВ. Требования к электрической прочности изоляции Степень защиты p Все наружные поверхности ячейки: IP3X p Между отсеками: IP2X p Главные цепи и все высоковольтные части: IP67 (кроме измерительных ячеек M06A, M12A) Класс защиты от механических воздействий p IK07 для стандартного исполнения Затопление p Работа всех типов ячеек в течение 3 дней после затопления (за исключением измерительной ячейки с воздушной изоляцией M06A) p После затопления принадлежности, вспомогательное оборудование и реле могут требовать обслуживания или замены Виброустойчивость p МЭК 60721, уровень 3M4 для стандартного исполнения p IACS-E10 для специального морского исполнения (*) Характеристики окружающей среды Высота p До 3000 м - без принятия специальных мер, за исключением экранированных кабельных соединений p Выше 3000 м - стандартные меры предосторожности: экранированные кабельные соединения и снижение на 10% диэлектрических свойств каждые 1000 м Температура (исполнение для внутренней установки) p При хранении: от – 40 до + 80°C p При работе: от – 25 до + 40°C (нормальные условия), МЭК 60721 – уровень 3K6 p При работе: от – 40 до + 65°C (за информацией обращайтесь в Schneider Electric) Конденсация / влажность p МЭК 60721, уровни 3K6 и 3Z7 Химическое воздействие / загрязнение p МЭК 60721, уровень 3C2 Пыль p МЭК 60721, уровень 3S2 Горючесть и огнестойкость p Испытания при 850°C в соответствии с МЭК 60695-2-10 /-11 /-12
Простая утилизация
Отсутствие элегаза (SF6) облегчает утилизацию распределительного устройства по окончанию срока службы
Широкая гамма коммутационных аппаратов
Возможность выбора коммутационного аппарата, оптимального по стоимости и характеристикам

<% product.model %>-<% product.amperage %>/5-<% product.class %>-<% product.nominal_load %>

<% product.count %> x <% product.price %> руб

<% updateNumber(cartTotalAmount) %> ₽ (с НДС)

Send a request